Welcome to your Box of Beauty banner Install instruction video So if you need a stool just depends on your

height Pen squeegee some rags the iso alcohol some a tape and your tape measure and maybe a

knife give it a good thorough clean That's the best thing about iso it'll just dry away That's

how my work just as well Just be careful on some of the plastics and do Alright

We take the banner and just to find that center and just give it a

little bold pinch it I'll tell you where your middle is Just mock that just find some pieces of tape

to use as an indicator Just measure across Sometimes somebody might need to give your hand You don't need to

be exactly perfect You know within 5 10 even 20 millimeters it should be ok Find

that center Now we're gonna invert the banner This method is a way for a deep windscreen like the

Rs So we're just gonna tag it at the top run a a hinge across the middle

make sure that it's straight Sometimes you just gotta check each side that you didn't rotate It

just mark out where that edge of the windscreen is run your pen This just saves us

putting a knife on the screen where your seals are make sure you leave your

tags there So you know where your center is Now we're just gonna cut that out with the

scissors Now we're gonna lay it back on get it in its position and then we're

just gonna create our hinge down the center lifted up one side and peel it away Get your scissors

Now cut the backing away Get your squeegee squee you down one side Now we go over take the

hinge away take the backing off again from the other side Try to make sure that you do this in

a shaded area and not in direct sunlight The direct sunlight will make the vinyl very soft

and stretch That's it Cut it down and you're done